This is an aluminum bodied pressure chamber that is used for on road cars. It mounts on the pressure line that goes in-between the pipe and take lid. It will help in stabilizing back pressure in high speed sweepers, braking and acceleration.
This is all the plastic mounting parts for the pressure chamber.
This is a replacement pulley set for the Mugen BII/III and RII/III starter boxes. There is 2 bigger pulley’s that mount on the rubber wheel and 2 smaller pulleys that mount off the electric motors. These are very easy to replace and will keep your...
This is 1 replacement rubber starter wheel for all Mugen BII/III and RII/III starter boxes.
B0239 Belt for BII
This package contains 15 3mm flat aluminum washers. These washers can be used in many different places on your car and hold very strong with a counter sunk screw
This package contains 15 – 4mm flat aluminum washers. These washers can be used in many different places on your car and hold very strong with a counter sunk screw
A replacement set of 1/10 scale body clips. 6 body clips included
A universal pinion gear tool for the MTX6R. Included is an aluminum hub to hold and lock the clutch bell and a 2nd tool to install and tighten up both 1st and 2nd gear pinions onto the clutch bell. This tool allows tightening the pinion gears without...
B0638 SM3.5x40 F/H Tapping Screw
B0640/1 SJG 2x6 F/H Screw (10pcs)
B0640/2 SJG 2x16 F/H Screw (10pcs)