MBX-7

Mugen Seiki

B0120 Air Filter Set: X8, X8T, X7

This is a complete air filter set intended to be used on all Mugen 1/8 nitro buggy’s, truggy’s and many other manufactures 1/8 nitro vehicles too. Included in this package is: 1 air filter housing 1 foam air filter 1 rubber elbow for the...

Mugen Seiki

B0121 Air Filters 4pcs: X8, X8T

This is a replacement set of 4 foam air filters to be used with B0120.

Mugen Seiki

B0431 3mm Cone Washer 4pcs

This is a pack of 4 of 3mm coned washers. These are used to add support for the bolt on the shock tower on the 1/8 nitro and electric buggy’s and truggy’s. These can be used on many other manufactures cars too.

Mugen Seiki

C0107D Pivot Ball (4pcs): X8, X8T

These are a bag of 4 steel pivot balls used for the rear camber link that attaches to the rear hub carrier. These are 6mm balls, 4pcs in a bag. X8/E, X8T/E

Mugen Seiki

C0129 Rear Camber Link Tie Rod (2pcs): X7

C0129 Rear Camber Link Tie Rod (2pcs): X7

Mugen Seiki

C0222C Diff Cross Shaft 2pcs

C0222C Diff Cross Shaft 2pcs

Mugen Seiki

C0230 Diff Gear 10T 4pcs

C0230 Diff Gear 10T 4pcs

Mugen Seiki

C0257 Diff Gasket 10pcs: RR

C0257 Diff Gasket 10pcs: RR

Mugen Seiki

C0304A Brake Calipers: X5

C0304A Brake Calipers: X5

Mugen Seiki

C0529A Sway Bar Link Balls (4pcs): X8/E, X8T/E

These are the steel balls that attach the sway bar link into the front / rear suspension arm. There are 4 balls per bag. X8/E, X8T/E

Mugen Seiki

C0601 Ball Bearing 8x16mm (2pcs)

These are the stock Mugen 8x16mm ball bearings. There are 2 in a bag.

Mugen Seiki

C0601/1 Ball Bearing 8x16mm (10pcs)

These are the stock Mugen 8x16mm ball bearings. There are 10 in a bag.