MBX-7R

Mugen Seiki

B0104 Fuel Filter Short

B0104 Fuel Filter Short

Mugen Seiki

B0120 Air Filter Set: X8, X8T, X7

This is a complete air filter set intended to be used on all Mugen 1/8 nitro buggy’s, truggy’s and many other manufactures 1/8 nitro vehicles too. Included in this package is: 1 air filter housing 1 foam air filter 1 rubber elbow for the...

Mugen Seiki

B0121 Air Filters 4pcs: X8, X8T

This is a replacement set of 4 foam air filters to be used with B0120.

Mugen Seiki

C0107D Pivot Ball (4pcs): X8, X8T

These are a bag of 4 steel pivot balls used for the rear camber link that attaches to the rear hub carrier. These are 6mm balls, 4pcs in a bag. X8/E, X8T/E

Mugen Seiki

C0129 Rear Camber Link Tie Rod (2pcs): X7

C0129 Rear Camber Link Tie Rod (2pcs): X7

Mugen Seiki

C0222C Diff Cross Shaft 2pcs

C0222C Diff Cross Shaft 2pcs

Mugen Seiki

C0230 Diff Gear 10T 4pcs

C0230 Diff Gear 10T 4pcs

Mugen Seiki

C0257 Diff Gasket 10pcs: RR

C0257 Diff Gasket 10pcs: RR

Mugen Seiki

C0265 Joint Pin 2.5 x 15.8mm (6pcs)

This is the joint pins used to hold together center universals. The pins are 2.5x15.8 long. There are 6pcs in a bag

Mugen Seiki

C0270 Joint Pin 3 x 12.8mm (10pcs)

These are the replacement pins for the head of the front / rear center drive shafts for the 1/8 nitro / electric buggys and truggys. They are 3x12.8mm long, 10pcs in a bag

Mugen Seiki

C0271 Joint Pin 3 x 13.8mm (10pcs)

These are the replacement pins for the head of the front / rear universal drive shafts for the 1/8 nitro / electric buggys and truggys. They are 3x12.8mm long, 10pcs in a bag

Mugen Seiki

C0529A Sway Bar Link Balls (4pcs): X8/E, X8T/E

These are the steel balls that attach the sway bar link into the front / rear suspension arm. There are 4 balls per bag. X8/E, X8T/E