Flash Point Racing Products
This is an optional Mugen Seiki MBX8 rear shock tower. E2563B offers a new raised wing mount position to increase stability and rear traction on the MBX8 and MBX8 ECO. The camber link locations and shock mounting locations are the same as the...
MBX8E Body (.8MM)
E0117 Titanium Rear Camber Link Tie Rod (2pcs)
This is the stock .8mm thick MBX8 body. The body is pre-cut for easy mounting.
- Nose piece
- Window mask
- This is the option front 4mm graphite shock tower. The graphite shock tower is lighter than the stock aluminum version.
This is the stock aluminum rear shock tower for the MBX8
This is the stock aluminum front shock tower for the MBX8
This is the stock 44T conical gear for the MBX8. This is used with the stock E2253 13T bevel gear.
- This is an optional 42T conical gear for the MBX8. This is used with the optional E2252 12T bevel gear. By using this combination you can change the drive gear ration of your buggy.
This is an optional graphite front upper steering plate for the MBX8/E and MBX8T/E. This graphite steering plate will increase stiffness between the steering posts to the front bulkhead. All necessary hardware is included.
This is the aluminum lower rear suspension arm mount “R” for the MBX8/E and MBX8T/E. This arm mount is the rear mount that holds the lower rear suspension arms to the bulkhead. This mount will only work on the E2142 bulkhead. It is made from...
The Flash Point Brass Pistons feature a flat profile, with tapered holes to provide quicker rebound. The increased weight of brass piston will slow down the shock shaft speed, resulting in smoother easy to drive feeling over bumpy surfaces. You’ll...