This is a new set of soft differential outdrive o-rings for the MTC1. These softer o-rings create a very smoother differential action, better corner entry speed and improved stability exiting a corner. There are 10 o-rings per package.
B0104 Fuel Filter Short
This is a complete air filter set intended to be used on all Mugen 1/8 nitro buggy’s, truggy’s and many other manufactures 1/8 nitro vehicles too.
Included in this package is:
1 air filter housing
1 foam air filter
1 rubber elbow for the...
This is a replacement set of 4 foam air filters to be used with B0120.
This is a pack of 4 of 3mm coned washers. These are used to add support for the bolt on the shock tower on the 1/8 nitro and electric buggy’s and truggy’s. These can be used on many other manufactures cars too.
This is a bag of SJG4x20 Titanium F/H Cap Screws (4pcs.)
These are a bag of 4 steel pivot balls used for the rear camber link that attaches to the rear hub carrier. These are 6mm balls, 4pcs in a bag. X8/E, X8T/E
This is the universal joint barrel and set screw used for the front / rear / center drive shafts.
- C0264 x 2pcs
- SK4x4 x 2pcs (B0680)
This is the joint pins used to hold together center universals. The pins are 2.5x15.8 long. There are 6pcs in a bag
These are the replacement pins for the head of the front / rear center drive shafts for the 1/8 nitro / electric buggys and truggys. They are 3x12.8mm long, 10pcs in a bag
These are the replacement pins for the head of the front / rear universal drive shafts for the 1/8 nitro / electric buggys and truggys. They are 3x12.8mm long, 10pcs in a bag
These are the steel balls that attach the sway bar link into the front / rear suspension arm. There are 4 balls per bag. X8/E, X8T/E