Graphite Rear Shock Tower: MBX8T/E
This is an optional Mugen Seiki 4mm Carbon Fiber rear shock tower for the MBX8T and MBX8T ECO. The use of carbon fiber shock towers will reduce weight and lower the center of gravity of the vehicle. The reduced weight...
The hole for the attachment of steering rod moved 3mm outside (tire side)compare to the kit standard (E2153).The new front upright arm improves the initial steering response and makethe vehicle more stable through the middle and exit of the corner...
These are the stock Mugen 15x21x4mm ball bearings. There are 10 in a bag.
These are machines pistons for Mugen 16mm shocks. These pistons have 6 – 1.3mm holes. There are 4 pistons in a bag.
This is the rear wing mount which is 15mm higher than the stock on. This will create more traction and better jumping abilities on various racing conditions. This will fit the X8 series of buggy's and truggy's
- E2428A x 1pc
- E2428B x...
Instruction manual for MBX8TE
This is a Mugen designed MBX8T / MBX8TE body produced by Proline. Includes window mask and front grill and light decals.
This is the stock aluminum rear shock tower for both the 8T/8TE.
This is the stock aluminum front shock tower for both the 8T/8TE.
High quality 7075 chassis for the MBX8TE electric truggy.
This is a complete set of universal drives shafts. They are used for both the front and rear of the 8T/8TE.
This is the stock 46T hard-coated conical gear that bolts to the differential for the 8T/8TE. This is used for both the front and rear differentials.